To maintain protection against mold re-growth, do not rinse or wash surfaces after Concrobium treatment. A thin, even layer of the product should remain on surfaces to prevent mold spore attachment. If surface is subsequently painted or coated with another substance, reapply Concrobium to ensure protection against mold.
Full Answer
How much concrobium do I use to clean my carpet?
For general carpet cleaning: add 150 mL (5 oz.) of Concrobium Carpet Shampoo per 3.78 litres (1 gallon) of hot water (use warm water for upholstery). Approximate coverage: 1000-1500 sq.ft./3.78L.
How do I Clean my concrobium products?
If staining or residue remains, scrub with a Concrobium-dampened cloth or brush – or take other cosmetic steps to improve the look of the surface. Remember that once the cleaning step is complete it’s important to leave a layer of Concrobium Mold Control on the surface to provide mold resistance.
Does concrobium mold control discolor carpet?
It will not discolor the carpet, though it’s still a good idea to test on an inconspicuous section first just to be sure. If you suspect mold in your carpet, you should pull it back to see if mold is growing on the subfloor and underpadding as well. Will Concrobium Mold Control remove mold from tile grout?
Should I let concrobium mold control dry before applying?
It is best to allow surfaces to dry first before applying Concrobium Mold Control since excessive moisture or water on the surface can dilute the product and impact its efficacy. Will Concrobium Mold Control harm artwork?
What is the best mold control for carpet?
What to do if your room smells musty?
How to get rid of mold spores?
Does Concrobium bleach?
Can you use Concrobium on carpet?
Can Concrobium Mold Control be used on carpets? Concrobium Mold Control is great for eliminating odors in carpets since its encapsulating action traps and eliminates odor-causing particles. It will not discolor the carpet, though it's still a good idea to test on an inconspicuous section first just to be sure.
Do you have to wipe off Concrobium?
The product works as it dries, so the surface only needs to be lightly wetted for it to be effective. Avoid over-application as it can result in some white residue forming as the product dries. If you do get residue, just wipe it away with a Concrobium Mould Control-dampened cloth.
Can carpet with mold be cleaned?
If you have just a small amount of mold, less than 10 square feet (3in x 3in patch), you should be able to remove it. If it is more than that, or you had flooding that included sewage, hire a professional to remove the carpet and replace it. Mold on throw rugs that can be washed can usually be cleaned and salvaged.
How do you clean Concrobium?
Apply Concrobium Mold Control in a thin, even layer over the affected surface. Allow to dry completely. With a Concrobium dampened cloth or brush, scrub the surface to clean away any remaining mold stains and residue. To protect against future mold growth, reapply Concrobium Mold Control on vulnerable surfaces.
Is Concrobium toxic to humans?
Concrobium Mold Control contains no bleach or harmful chemicals. It will work on wood, laminates, concrete, siding, and many other surfaces, and is non-toxic.
Does Concrobium work on black mold?
All you have to do is spray them on, wait several minutes, and the mold colonies will die and can no longer reproduce and multiply. A popular chemical for killing mold is Concrobium Mold Control, which can be bought at big-box hardware stores. It's used by both pros and homeowners.
What kills mold and mildew in carpet?
Because hydrogen peroxide is a natural antifungal, you can use it on pretty much any surface to stop and even eradicate mold. Combine about 3 percent hydrogen peroxide with water in a spray bottle, apply to the area, and leave for 10 minutes. Then scrub the mixture out and dry the area.
How do you clean black mold out of carpet?
If you have black mold on carpet, start by removing as much excess moisture up (cloth, drying machine, sponge). Use a disinfectant solution such as alcohol, vinegar etc. to kill the bacteria and remove any staining. Finally, dry the area and ensure it is as dry as possible to prevent any chance of happening again.
How do I know if mold is under my carpet?
The easiest way to detect mold in carpet is to smell the carpet to see if it has a bad odor. If it does, look for visible signs of mold on the top and bottom of the carpet, like black, green, or white growth. Experiencing bad allergies can also be a sign that your carpet has mold in it.
Can I use Concrobium indoors?
Concrobium Mold Stain Eraser is a powerful cleaning solution that targets tough and embedded mold and mildew stains on outdoor and indoor surfaces.
Is Concrobium better than bleach?
It's an odourless liquid that's completely safe and works without toxins. Instead it kills mould and mould spores by physically crushing them as the liquid dries. Concrobium also provides residual anti-mould action, which is something that bleach doesn't do.
Does Concrobium remove mold stains?
Concrobium Mold Stain Remover delivers exceptional mold stain removal with no brushing, sanding or blasting. That helps professional restoration contractors reduce labor costs and complete jobs more quickly.
How many square feet does Concrobium carpet shampoo cover?
Concrobium Carpet Shampoo is engineered to work in all types of hot water carpet extractor machines delivering exceptional coverage up to 1,500 square feet per gallon.
How to clean a stain with concentrate?
For manual spot cleaning: apply concentrate directly on stain and agitate with a cloth or brush. After cleaning, keep off carpet and upholstery until dry.
Does Concrobium shampoo work?
Unlike other carpet shampoos, Concrobium Carpet Shampoo contains no soaping agents, so there’s no sticky residue left behind to cause resoiling and dulled appearance, and no need for anti-foaming additives.
What is the Concrobium mold control?
Concrobium Mold Control is a patented formula that eliminates mold below the surface and leaves an invisible antimicrobial shield to prevent it from returning all without the use of harmful chemicals.
Does Concrobium offer refunds?
Concrobium proudly stands by every product and if you’re unsatisfied with the performance of your purchase we will offer you a full refund.
Is Concrobium safe to use?
Safe for everyday use. Concrobium products are engineered to tackle the toughest mold, moisture and cleaning jobs, while designed as safe to use around all the things you care about.
How long does it take for Concrobium to dry?
Generally, it will dry in less than 2 hours. If you are painting on top of the Concrobium Mold Control application, you should allow 24 hours of drying time.
How to apply Concrobium Mold Control?
Depending on the area or surface you are treating with Concrobium Mold Control, you can apply the solution by: spray bottle (small targeted areas); brush or roller (trim); pump sprayer (large, accessible areas like walls); or cold fogger (large, enclosed areas like basement or attics).
How to remove mold from a carpet?
First spray the area with Concrobium Mold Control to treat the mold. Then use a grout whitener to cover or remove the stain. Lastly, once dry and clean, use Concrobium Mold Control again to lay down the protective barrier.
How to treat moldy paint?
If you wish to treat and then repaint a moldy surface, first apply the solution to clean the affected area. Allow to dry and then repaint. To prevent regrowth, retreat the newly painted area with Concrobium Mold Control – ensuring first that the newly painted surface is dry.
What surfaces can Concrobium be used on?
On what surfaces can Concrobium Mold Control be used? Concrobium Mold Control is EPA-registered for and effective on both hard and fabric surfaces, including wood, drywall, tile, stone, cement, masonry, fabric, upholstery and virtually any other household surface.
Is Concrobium Mold Control just water?
Is Concrobium Mold Control just Sodium Carbonate (washing soda) and water? No. Sodium Carbonate is the listed “active ingredient” on the Concrobium Mold Control label, but in fact there are two other ingredients in the solution which, when combined with the sodium carbonate and the water, result in this patented tri-salt polymer ...
Is Concrobium a good cleaner?
Concrobium Mold Control is a very effective cleaner, though in some circumstances you may find that the mold stains left on a surface are embedded and very difficult to scrub away. In this case, ensure that the treated surface is completely dry so that the mold spores have been eliminated.
How to get rid of mold on a carpet?
Just spray Concrobium on the affected moldy surface and allow to dry As it dries, the solution forms a film that crushes and eliminates the mold spores. Next, with a Concrobium dampened brush or cloth, w ipe away the remaining mold residue, leaving behind a thin layer of the product to prevent from future mold growth.
How to get rid of mold spores on a surface?
Just spray Concrobium on the affected moldy surface and allow to dry As it dries, the solution forms a film that crushes and eliminates the mold spores.
What to do if your room smells musty?
Tip: Suffering in a room that smells musty and moldy? Try foggingConcrobium Mold Control – it’s easy to do and will eliminate mold and musty odors.
What is the last product applied to a surface to ensure the protective barrier remains intact to prevent from future mold?
In any case, ensure that Concrobium is the last product applied to the surface to ensure the protective barrier remains intact to prevent from future mold.
Does Concrobium remove mold?
Once you have access to the mold, apply Concrobium Mold Control as a thin, even layer over the affected surface and allow to dry. As it dries, the solution forms a film that crushes and eliminates the mold spores. As Concrobium does not have any bleach or whitening agents, you may have to take additional steps to improve the look ...
Does Concrobium bleach?
As Concrobium does not have any bleach or whitening agents, you may have to take additional steps to improve the look of surface being treated if mold staining still remains. In any case, ensure that Concrobium is the last product applied to the surface to ensure the protective barrier remains intact to prevent from future mold.
Is it safe to use a colorless solution on furniture?
Any product residue remaining on the furniture or fabrics is non toxic, and completely safe for your family to be in contact with once it has dried. NOTE: The solution is colorless and won’t affect appearance, but will resist mold growth by preventing mold spores from attaching to the surface.
When is reapplication of concrobium required?
Reapplication of Concrobium Mold Control may be required if surfaces are washed or painted or are otherwise directly exposed to excessive water or rinsing. Surfaces that stay relatively dry and clean will remain continuously mold-resistant.
What is concrobium used for?
Concrobium Mold Control can be used to clean and eliminate existing mold problems, and/or to prevent mold growth in vulnerable areas. In conjunction with using this product, it is highly recommended that the conditions favorable to mold growth (excess water, humidity) be identified and corrected.
How big of mold can be remedied?
Areas of visible mold growth of less than 30 square feet (the area of a single wall panel) can normally be remediated without elaborate procedures. Areas larger than 30 square feet often require special procedures and individuals trained in remediation. Guidelines for remediation of large areas of contamination have been established by the Indoor Air Quality Associations (www.iaqa.org) and the US Environmental Protection Agency (www.epa.gov). Many in the field also refer to the New York City Department of Health, “Guidelines on Assessment and Remediation of Fungi in Indoor Environments.”
Does Concrobium kill mold?
Concrobium Mold Control® dries on surfaces to create an invisible antimicrobial shield that kills and prevents mold, and gets rid of musty odours. The breakthrough, Health Canada approved solution contains no bleach, ammonia, alcohol or other VOCs and is suitable for use on almost any surface.
What to do after cleaning concrobium?
As a final step after cleaning, reapply Concrobium Mold Control to leave a thin layer of the solution on the surface to protect against future mold growth.
How to use Concrobium moisture grabbers?
Manage humidity with Concrobium Moisture Grabbers and if you do encounter any mold, use Concrobium Mold Control to clean and remove mold in the bathroom: in shower stalls , bath tubs , behind toilets, in cabinets and on ceilings, tiles and walls. Spray Concrobium Mold Control to affected areas and allow surfaces to dry completely.
How to clean mold stains?
Walls, Floors, Ceiling & Cabinetry. Clean the surface with a Concrobium-dampened cloth or brush. If mold staining remains, you may have to take additional cosmetic steps like re-painting, or try using Concrobium Mold Stain Eraser ...
How to prevent mold in bathroom?
Tip: Help prevent mold by ensuring proper bathroom ventilation. Ensure a ventilation fan is properly installed and run it often to reduce bathroom humidity. To clean mold and remove mold in the bathroom, spray Concrobium Mold Control on the moldy surface, allow to dry. Make sure the surface is completely dry prior to application; a thin, even application is all that’s required.
How does concrobium work?
It has several different methods with which it can be applied; by aerosol, spray bottles, and for larger areas it can purchased by the gallon and used in an ULV fogger. If your mold problem encompasses a larger area, it would be wise to get a free mold consultation, or just some free qualified advice, from a local mold expert. These experts have been pre-screened and are licensed mold remediators. Just follow the link to get a list of local experts.
Does concrobium kill mold?
The Concrobium was allowed to dry and we did not wipe it off. As Concrobium Mold Control dries it creates a barrier that kills, then contains the mold, then acts to prevent the re-growth of any mold. Another recent remediation project that I used Concrobium Mold Control on was a concrete block basement.
Can mold control be used on furniture?
Before using Mold Control on any type of furniture and fabrics make sure to test it in an inconspicuous area first. It can be used on finished and unfinished surfaces. Spray and forget – it actually leaves behind a barrier that inhibits any mold from returning. Mold Control eliminates existing mold and their odors.
Does Concrobium Mold Control work on wood?
Concrobium Mold Control contains no bleach or harmful chemicals. It will work on wood, laminates, concrete, siding, and many other surfaces, and is non-toxic.
Does Concrobium bleach?
Since Concrobium contains no bleach or whitening agents, it will do nothing to alleviate any staining that has taken place over time. Sometimes, people tend to associate the mold’s staining with an incomplete or an imperfect mold removal process, which is not necessarily true in all cases.
What is the best mold control for carpet?
Any organic material can serve as the food source, including drywall, wood, fabrics, or any soiled surface. Solution . Concrobium Mold Control is great for eliminating odors and odor causing particles in carpets.
What to do if your room smells musty?
Suffering in a room that smells musty and moldy? Try fogging Concrobium Mold Control – it’s easy to do and will eliminate mold and musty odors.
How to get rid of mold spores?
As it dries, the solution forms a film that crushes and eliminates the mold spores.
Does Concrobium bleach?
As Concrobium does not have any bleach or whitening agents, you may have to take additional steps to improve the look of surface being treated if mold staining still remains.
