how to use kirby carpet cleaning system

^{How to Use the Kirby Carpet Shampoo System}

1. Prepare the Carpet and Room. Vacuum the carpet to be shampooed. Move as much of the furniture out of the room as possible. ...
2. Remove the Vacuum Head. Unplug the vacuum. Remove the vacuuming head from the Kirby vacuum by turning the belt knob to match the red arrows.
3. Turn Knob to Red Arrows. Turn the knob on the front of the assembled shampoo attachment to match the red arrows. ...
4. Add Shampoo Attachment. Slide the shampoo attachment into place and turn the belt indicator to match the green arrows. ...
Fill the Clean Water Compartment. Fill the tank with warm tap water and shampoo. The quantities depend on the size of the room to be vacuumed.
Attach the Tank to the Unit. Attach the tank to the top of the shampoo attachment on the right side of the unit, and lock it into place.
Adjust the Foam Output. Plug in the vacuum, turn the Kirby on and turn the knob on the top of the shampoo tank until a light fluffy foam ...
Apply Foam to Carpet and Let it Soak In. ...
Remove Foam. Pull the machine backward over the foam to remove it from the carpet. The Kirby does not vacuum up the foam.
Allow Carpet to Dry. Allow the carpet to dry from two to three hours and vacuum thoroughly.
Care for the Shampoo Unit. Disassemble the shampoo unit and rinse all the parts, except the brushes, with clear water, and allow to air dry.

Can you use regular carpet shampoo in a Kirby?

Standard shampoo is made for water extraction, if used in a Kirby system it will leave chemical residue in your carpeting. As those types are made to be rinsed out. I would not use anything other than a dry foam shampoo. It'd be the best and easiest to just stick to Kirby's line.

How do you clean Kirby?

What all can you do with a Kirby vacuum?

1. Blower/ Inflator. The first thing Kirby vacuums do that many people aren’t aware of is blowing and inflating.
2. Hard Floor Polisher.
3. Shampooer.
4. Pet Hair/ Stair Cleaning.
5. Mattress Cleaning.

How much does a Kirby carpet cleaner cost?

The Kirby vacuums are expensive, but they wouldn’t cost you the world. They still come in around $900 to $2500. If you don’t have that kind of money, you can own a Kirby as many second options are available online. It may seem risky, but used machines can also be an investment.

How to shampoo carpet with Kirby?

Ingredients & procedure:

• Take 12 cups of water.
• Take 1 tablespoon of white vinegar in that water and mix them.
• Take ½ tablespoon of rubbing alcohol and mix it as well.
• Take 3 tablespoons of dish soap and add them to water. (It can be anything like Palmolive or dawn).

See more

How do I clean my carpet with a Kirby vacuum?

0:042:30How to attach the Kirby Vacuum Carpet Shampooer - SentriaYouTubeStart of suggested clipEnd of suggested clipPull the shampooer belt up away from the brush. Make sure the green arrows on the shampoo systemMorePull the shampooer belt up away from the brush. Make sure the green arrows on the shampoo system nozzle are lined up slide the carpet shampoo system nozzle onto the shampoo tray.

How do I use the Kirby carpet cleaner attachment?

How to Use the Kirby Carpet Shampoo SystemStep 1: Prepare the Carpet and Room. ... Step 2: Remove the Vacuum Head. ... Step 3: Turn Knob to Red Arrows. ... Step 4: Add Shampoo Attachment. ... Step 5: Fill the Clean Water Compartment. ... Step 6: Attach the Tank to the Unit. ... Step 7: Adjust the Foam Output.More items...

How do I use the Kirby cleaner?

1:267:44About the Kirby Avalir Vacuum - How to Use - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the unit on adjust the unit to the proper cleaning height. Then push down the right pedalMoreTurn the unit on adjust the unit to the proper cleaning height. Then push down the right pedal marked D for drive to turn tech drive on this makes it easy to push the unit while vacuuming.

How long does it take for Kirby carpet shampoo to dry?

1-3 hoursLet it dry completely (normally takes 1-3 hours, if you did 2-3 passes with Kirby shampooer it may take a bit longer). There is still some dirt left that brush did not scoop up but when drying shampoo does not let the dirt stick back to the carpet.

What does the N and D mean on a Kirby?

VACUUMING. Q: What is the N/D pedal on the back of the Kirby for? A: This is your Neutral/Drive pedal. When you are vacuuming or using the carpet shampooer in the upright position, push down the Drive (D) pedal.

What can I use in place of Kirby shampoo?

The recipe that I ended up using to make the shampoo was:12 cups Water.1 Tbs White Vinegar.3 Tbs Dish Soap (Dawn, Palmolive, etc.) All you have to do is add the dish soap last to avoid creating too many bubbles, mix well and pour directly into the soap tank.

How do you start a Kirby?

0:546:17My Kirby Won't Turn On! Safety Switches and Other ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou have to put the head on and then there's this little tab that sticks out of the head. It sticksMoreYou have to put the head on and then there's this little tab that sticks out of the head. It sticks out about a half inch past the head here.

How do I shampoo my bed with a Kirby?

2:0612:33Kirby Vacuum Avalir to mattress cleaner with dirt meter ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake your belt off like. So and then clip. That that's on straight suction this will suck up to 15MoreTake your belt off like. So and then clip. That that's on straight suction this will suck up to 15 inches deep kilby recommend.

What vacuum is better than a Kirby?

The Dyson was a little over 5 lbs lighter than the Kirby when we weighed them on our shipping scales. Ease of vacuuming was easier with the Kirby, but with on-board tools and lower carrying weight, the Dyson won this contest.

Can I use regular carpet shampoo in my Kirby?

Q: What shampoo can I use in my Kirby? A: You should only use genuine Kirby Carpet Shampoo in Kirby shampoo systems. For a fragrance-free option, please try Kirby Unscented Carpet Shampoo!

Can I make my own Kirby shampoo?

Kirby DIY dry foam carpet shampoo 3QT cold water 3TBS dish soap 1TBS white vinegar 1/2Tsp ammonia Use funnel to add water to milk jug first. Add other ingredients. Shake. I let mine sit for 20 mins before I used it.

How do you clean a couch with a Kirby?

4:4611:32How to Shampoo Your Upholstery & Stairs with a Kirby - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing either a soft brush or a medium brush just depending on the type of fabric that you'reMoreUsing either a soft brush or a medium brush just depending on the type of fabric that you're cleaning. So for this fabric being a loose fiber we're going to use a soft bristle brush.

How do you attach attachments to a vacuum?

You may need to add an extension to your attachment or use a step stool or small ladder in order to reach higher surfaces. Work your way down from ceiling to floor in a vertical motion as you vacuum. Use the dust brush attachment – close the blind slats so they lie flat and vacuum.

How do you attach the hose to a Kirby vacuum?

0:111:04How to attach the Kirby Vacuum hose - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe connector end of the attachment hose you will notice two hooks hook the hose end over theMoreThe connector end of the attachment hose you will notice two hooks hook the hose end over the attaching bar then lock in place by turning the accessory lock clockwise all the way to the right.

How do you use carpet shampoo?

0:374:37How To Shampoo Your Carpet - Steam Clean Carpet Stains For ...YouTubeStart of suggested clipEnd of suggested clipAll you need to do is hit the start power it on and just go right over it like a vacuum cleaner you'MoreAll you need to do is hit the start power it on and just go right over it like a vacuum cleaner you're going to go over it once with the wash. And then once or twice with the rinse.

How to remove foam from carpet with Kirby?

Pull the machine backward over the foam to remove it from the carpet. The Kirby does not vacuum up the foam. When pulled backward the brushes pick up the foam and deposit it in the tray. Use smooth motions with the machine to avoid sloshing dirty solution out of the pickup tray onto the cleaned carpet. Empty the collection tray as needed.

What is Kirby shampoo?

The Kirby shampoo system attaches to the front of a Kirby vacuum after the vacuuming head is removed. This attachment cleans by generating foam to apply to the carpet and does not saturate the carpet with water, making it quick and easy to use. Advertisement. How to Use the Kirby Carpet Shampoo System.

How to remove the vacuum head from a Kirby vacuum?

Remove the vacuuming head from the Kirby vacuum by turning the belt knob to match the red arrows. This releases the belt. Remove the vacuuming head and bag assembly from the right side of the vacuum.

How to stain a wood floor with wax paper?

Step 1: Prepare the Carpet and Room. Vacuum the carpet to be shampooed. Move as much of the furniture out of the room as possible. Place sheets of wax paper or foil under the legs of furniture remaining in the room, to prevent staining of any wood.

Where is the shampoo tank on a shampooer?

Attach the tank to the top of the shampoo attachment on the right side of the unit, and lock it into place. Connect the solution tank to the collection tray on the front of the unit with the hose.

Does Kirby vacuum foam?

The Kirby does not vacuum up the foam. When pulled backward the brushes pick up the foam and deposit it in the tray. Use smooth motions with the machine to avoid sloshing dirty solution out of the pickup tray onto the cleaned carpet. Empty the collection tray as needed. Advertisement.

Is Myra Smith retired?

Myra Smith has retired from the business world after successfully working as a manager in the accounting field over twenty years. Smith received her education in Texas (high school) and Missouri (University of Missouri) business courses offered by employer. Smith has now embarked on an exciting second career as a writer for Demand Studios. Smith writes articles in the Home and Garden section.

How to use Kirby Avalir 2 as a carpet shampooer?

Instead, simply convert your Kirby Avalir 2 Home Cleaning System into a carpet shampooer by removing the power nozzle and the filter bag and attaching the Multi-Surface Shampoo System to the unit.

What attachments do you need for Kirby Avalir 2?

Use your Kirby Avalir 2 System with the optional Zippbrush attachment to clean furniture on a regular basis.

What is the best vacuum cleaner for stairs?

Stop messing with weak hand-held vacuum cleaners and use your Kirby Avalir 2 Home Cleaning System to get the job done quickly and efficiently. Your Kirby vacuum includes several carpet cleaning attachments to clean your stairs with ease.

How long does it take for a Kirby pre treat to sit on carpet?

Allow pre-treat to sit on carpet fibers for up to 5 minutes before shampooing with the Multi-Surface Shampoo System.

How to shine a sealed hardwood floor?

To bring a high gloss shine to your sealed hardwood floors, use the Multi-Surface Shampoo System with the Kirby Miracle Shine kit. Simply spray Kirby Miracle Shine on your floors then buff with the power of your Kirby! This durable polymer coating brings out your floor’s original shine all with the power of your Kirby system!

How to get rid of Kirby pet stain?

Shake Kirby Pet Stain & Odor Remover then generously apply directly to stain. Repeatedly blot area with a clean, white cloth to remove stain. Once you have removed everything you can, rinse a clean, white cloth under water and lay over stain covering entire area.

How to stop Kirby brush roll from spinning?

Straight suction prevents the brush roll from spinning and avoids potential scratching of delicate wood floors. Use the belt lifter to disengage the brush roll. This will prevent the brush roll from spinning and will allow the Kirby System to clean using suction power only.

How to use a portable sprayer?

The portable sprayer can only be used in the blower mode (visit page 26 of your owner manual). Place the hooks on the back of the air guard over the attaching bar located on the front of the unit. Push the air guard against the unit and turn the accessory lock clockwise to secure in it in place. Remove the outer bag by pressing the bag release button on the top of the bag, and rotating the bottom base of the bag away from the unit to remove. Then, connect the hose to the air exhaust port. Simply line up the arrow on the end of the hose with the arrow on the port; twist the hose clockwise until it locks.

How to remove a carpet roll from a rotary mop?

To remove the carpet brush roll and insert the Rotary Mop, turn the MSSS nozzle belt handle clockwise until the green arrows line up. Turn the nozzle upside down and pull on the belt until it’s lose and remove the carpet brush roll. Take the belt off the carpet brush roll and place onto the Rotary Mop.

How to clean hard surface with rotary mop?

To remove the carpet brush roll and insert the Rotary Mop, turn the MSSS nozzle belt handle clockwise until the green arrows line up. Turn the nozzle upside down and pull on the belt until it’s lose and remove the carpet brush roll. Take the belt off the carpet brush roll and place onto the Rotary Mop. Once the belt is on the appropriate brush roll, insert it back into the MS SS. Push up on the belt with your finger and turn the belt lifter handle counterclockwise until the red arrows line up. Raise the unit by pressing all the way down on the toe-touch pedal. Then, connect the hooks on the back of the MSSS to the attaching bar. Push the MSSS up against the unit, turn the Accessory Lock clockwise, and turn the belt lifter clockwise until the green arrows line up. Lower the hood and put on the waste tray.

How to change a belt on a Power Nozzle?

To change out a belt, use the handle, turn the nozzle belt lifter on your Power Nozzle clockwise until the green arrows line up. Turn the the Power Nozzle over and pull up on the belt to loosen and remove the brush roll that is currently inserted.

How to attach a filter bag to a bag?

First make sure your outer bag is unzipped and the top adaptor is pulled out. Take a new disposable bag out of the packaging. Then, rest the cardboard faceplate of the disposable filter bag against the bottom of the adaptor. Pivot the faceplate against the flat surface of the adaptor and bend and press the tab at the top of the faceplate until it’s secure. The bag support strap should be connected through the small hole on the adaptor, which is over the stud. Once connected, place the whole bag inside the outer bag and close the zipper.

How to change a vacuum to a blower?

To convert your vacuum to a blower, simply attach the hose to the exhaust port. First, remove the power nozzle, or front head of the vacuum, (see page 22 of the owner manual). Place the hooks on the back of the air guard over the attaching bar located on the front of the unit. Push the air guard against the unit and turn the accessory lock clockwise to secure in it in place. Remove the outer bag by pressing the bag release button on the top of the bag, and rotating the bottom base of the bag away from the unit to remove. Then, connect the hose to the air exhaust port. Simply line up the arrow on the end of the hose with the arrow on the port; twist the hose clockwise until it locks.

How to secure a vacuum head?

First, remove the power nozzle, or front head of the vacuum (see page 22 of the owner manual). Place the hooks on the back of the air guard over the attaching bar located on the front of the unit. Push the air guard against the unit and turn the accessory lock clockwise to secure it in place.