Hot water extraction is a method of carpet cleaning that uses hot water, detergent and vacuum to clean carpets. This method is used for both commercial and residential carpet cleaning. The process includes four steps: pre-vacuuming, shampooing, extraction and finishing.
Full Answer
How to clean carpets with hot water extraction?
But if you use hot water extraction, you will be able to clean your carpet deeply. Carpets get excessive dirty and they can pollute the air of your house if you do not clean it properly. Shampooing or dry cleaning will not be the actual method if you want profound sanitation.
Is hot water extraction better than steam cleaning?
But as the manufacturers say, hot water extraction is the best technique according to the environmental impact, safety and efficiency. There are many times when we see that Hot Water Extraction is named as Steam Cleaning. But there is a huge difference between both of these. In the Hot Water Extraction, there will be no association of Steam.
What is the hot water extraction process?
In the Hot Water Extraction, there will be no association of Steam. In the process of hot water extraction, the water is usually heated. According to sources, the temperature of the heat should be 122-448 degrees Fahrenheit. With the water, a cleaning solution should also be added for heating up. Often we see that carpets have stains on them.
Does hot water extraction kill microorganism?
The microbiological test by William C. McDonald who is a Microbiological Consultant also supports hot water extraction. It says that hot water extraction can lessen the intensity of microorganism. The test did a comparison between the “before and after” condition of the cleaning. Bacteria, mold and yeast were tested also.
Why is hot water extraction best for your carpets?
One of the main advantages of hot water extraction is that it's eco-friendly. It relies on water and high pressure to effectively clean your carpet without having to use any chemicals. Therefore, it won't affect people with allergies and it's safe for your children and pets as well.
How does hot water extraction carpet cleaning work?
Trained carpet cleaning experts use a professional hot water extraction cleaning machine to inject water and a cleaning solution into the carpet and remove dirt. The machine then extracts the solution and the hot water back out of the carpet so that it can dry quickly.
What is hot carbonating extraction carpet cleaning?
Hot Carbonating Extraction Cleaning Rather than soak your carpets with carpet, carbonating cleaning uses a super heated, low-moisture process to clean your carpet with millions of microscopic bubbles. These bubbles explode dirt from deep within your carpet fibers when the carbonation releases, lifting up the dirt.
What is extraction carpet cleaning?
Extraction carpet cleaning, also called hot water extraction, involves spraying the carpet with hot water using a spraying machine while simultaneously vacuuming the dislodged dirt and debris using a vacuum cleaner. Very little or no detergent is added to the hot water.
Is hot water best for carpet cleaning?
Hot water extraction is the better choice for cleaning, and this is the method used by most professional carpet cleaners, even those that refer to their cleaning as “steam cleaning.” As steam cleaning doesn't rinse the fibers, it's important to ask the cleaners to explain their cleaning method in detail.
Is hot water extraction the same as steam cleaning?
In hot water extraction method, all the water has not been converted into hot gas vapor. Steam carpet cleaning method gets water hotter and converts it all into steam so less water is used. However, steam cleaning does not rinse or remove dirt & stains as effectively as hot water extraction carpet cleaning does.
Does carbonated carpet cleaning work?
3. Chem-Dry's carbonation cleaning removes an average of 98% of common household allergens from carpet and upholstery, allowing you to breathe easier, literally!
What is hot water extraction cleaning?
Hot Water Extraction (HWE) is a method of carpet cleaning. It involves a combination of hot water and cleaning agents being injected into the fibers of a carpet at high pressure and all lifted soil being removed by a powerful vacuum.
What's the difference between an extractor and a carpet cleaner?
A carpet extractor is a machine that utilizes vacuum power to remove ground-in dirt from carpets. A carpet cleaner, on the other hand, uses water heated to over 140 degrees Fahrenheit to remove dirt from the surface of a carpet.
Can I just use hot water in my carpet cleaner?
Before you begin cleaning with water, run a vacuum cleaner over the carpet to pick up loose dirt, hair, and larger bits of debris. You'll need hot water for this method of carpet cleaning to live up to its full potential.
Why do we use hot water extraction?
Hot water extractions are used chiefly for cleaning the natural fibers. This is because hot water extraction can easily prevent shrinkage. More than any other methods of cleaning, hot water can avoid contraction and keep the carpet shrinkage-free. Vacuuming will clean the outer portion of your house.
How to clean carpet with alkali?
First, an ALKALINE cleaning solution should be used on the carpet surface. Then it should be slightly stirred up with a brush. Then the cleaning solution should be passed all over the carpet thoroughly. After this, the pre-conditioner should be rinsed out. Later, the carpet should be dried up.
What temperature should water be for extraction?
In the process of hot water extraction, the water is usually heated. According to sources, the temperature of the heat should be 122-448 degrees Fahrenheit. With the water, a cleaning solution should also be added for heating up.
Can you clean carpets with hot water?
But if you use hot water extraction, you will be able to clean your carpet deeply. Carpets get excessive dirty and they can pollute the air of your house if you do not clean it properly. Shampooing or dry cleaning will not be the actual method if you want profound sanitation.
Is hot water extraction good for carpet?
But as the manufacturers say, hot water extraction is the best technique according to the environmental impact, safety and efficiency.
Does hot water extraction kill germs?
The test did a comparison between the “before and after” condition of the cleaning. Bacteria, mold and yeast were tested also. It proved that hot water extraction minimizes about 96% of germs. They also mentioned that no harsh chemical would be there on the carpets after you clean it with hot water extraction.
Which company makes the best carpets?
The manufacturer company named DuPont is a topnotch industry when it comes to manufacturing the best carpets in the world. The manufacturer of this company also claims the importance of hot water extraction.
1. What is Hot Water Extraction?
It is a method to remove the deep stains in the carpets using high-pressure hot water. It has specialized technology to deal with the tough spots and clean the carpet effectively.
2. How Does It Work?
With the changes in the requirements, the hot water extraction cleaning method has also witnessed changes with technological advancements.
3. Benefits of Hot Water Extraction
This method is effective as it reaches the carpet deep inside, which is not possible by a vacuum cleaner. Hence, for a deep cleaning Hot Water Extraction carpet cleaning is preferred.
Professional Hot Water Extraction Carpet Cleaning!
You may want to rent a machine to do it yourself. Read more about DIY vs Professional carpet cleaning. ‘Prevention is better than cure’ so, before the carpets become too worn, filthy, and stained, step up to save them.
Facts About Hardfloor Restoration Services
The underpinning of a building is the flooring. They improve the appearance after opting for Hardfloor restoration services. Pristine flooring invariably greets visitors and provides a sanitary atmosphere for the household, as well as attracts clients. The tiling is a...
Signs To Consider For Having Mold Remediation Service
Mold at home? Do you know how dangerous it is for your health? If you don’t, then let us explain it to you. Mold is a fungus that is found in places with high-moisture percentages. You can find them indoors in your bathrooms, kitchen, attics, etc., and also outdoors....